Important: Remove the power before installing or removing modules, they cannot be hot swapped!
LED Light Guide
Learn what all of the lights mean and what to do here: IG41 LED Guide .
Note for Installations using Analog or Digital IO Modules:
The gateway may need to update before it will work with the IO modules. If the gateway is powered on for the first time with the modules connected and the main LED turns red, this is the case. Power down the device, remove the modules, and power it on again. Let it stay powered on and connected with a green LED for 30 minutes, then try adding the modules on again after removing power. If this does not work, contact support.
Wiring Diagram
Install Tips
The IG41 DIO Module can take sinking or sourcing inputs and will function with a minimum switching voltage of 10V.
