IG41 Module Install Guides + Wiring Diagrams

Summary

The IG41 has expandable IO available to read sensors or switches directly. Three different modules are currently available, and up to eight modules can be attached to one IG41.

In this section, we will provide specs and installation guides for all the different types of IG41 modules.

Note for Installations using Analog or Digital IO Modules:

The gateway may need to update before it will work with the IO modules. If the gateway is powered on for the first time with the modules connected and the main LED turns red, this is the case. Power down the device, remove the modules, and power it on again. Let it stay powered on and connected with a green LED for 30 minutes, then try adding the modules on again after removing power. If this does not work, contact support.