Summary

We will walk through how to create inputs and outputs off of Third Party Devices once you set up your Third Party Devices in the Cloud.

Create Data Inputs for Third Party Devices

  1. Set up the Third Party Device in the Cloud: Settings → Third Party Devices)

  2. Once done, go to I/O and Create Input with Source = Third Party Pin

    1. Select the pin for the input:

Examples of Third Party Data Inputs

  1. From Modbus TCP Device

  2. From an EIP Device

Create Data Outputs for Third Party Devices

  1. Set up the Third Party Device in the Cloud: Settings → Third Party Devices)

  2. Once done, go to I/O and Create Output with Source = Third Party Pin

    1. Select the pin for the output:

Examples of Third Party Data Outputs

  1. From Modbus RTU Device